Alvera AirLink 360 Swivel Elbow for AirFit F20, AirTouch F20 and AirFit F30 Masks Single Pack

The Alvera AirLink™ 360 is a compatible swivel ResMed AirFit F20 elbow that also fits AirTouch F20 and AirFit F30 full face masks. It is supplied as a single unit for sleep services, pharmacies and resellers.

Why the AirFit F20 elbow matters

The elbow is the joint between the mask frame and the tubing. AirLink 360 turns through a full 360 degrees, so the hose can follow the head as it turns instead of pulling on the cushion. It carries an integrated vent that clears exhaled air and a quick-release clip that holds it to the frame.

A worn AirFit F20 elbow is easily missed when a mask starts to leak. Because the swivel, vent and clip are under constant movement, the elbow is a wearing part. A loose or clouded elbow can leak or whistle even when the cushion is in good order, and renewing the elbow costs far less than a complete mask.

One part covers the F20 and F30 full face families, which simplifies stockholding for services fitting both. It connects to standard 22 mm tubing, standard or heated. It does not fit F30i or F40 masks, nasal or pillow masks, or AirMini set-ups. A separate two pack is available.

Key features

• Full 360 degree swivel: The tube follows the user through a change of position.
• Integrated vent: Clears exhaled air continuously during therapy.
• Quick-release clip: The mask comes off the tube in one movement and clips back without adjusting headgear.
• Two mask families, one part: Fits AirFit F20, AirTouch F20 and AirFit F30.
• Standard 22 mm tube connection: Works with standard and heated tubing.
• Coded for reordering: Single pack with its own reference and barcode.

Compatibility

• Compatible with ResMed AirFit F20
• Compatible with ResMed AirTouch F20
• Compatible with ResMed AirFit F30
• Not compatible with ResMed AirFit F30i
• Not compatible with ResMed AirFit F40
• Not compatible with Nasal and pillow masks
• Not compatible with ResMed AirMini set-ups

Options and product codes

Use and care

• The vent holes must never be blocked, taped or covered; check that air flows from the vent before every use.
• Fit only to a frame the elbow seats and locks into correctly, and do not use it if a vent is obstructed, the swivel is stiff or cracked, or the clip no longer holds.
• Wipe daily with a mask wipe or damp cloth, and wash weekly in warm water with a mild detergent, rinse and air dry away from direct sunlight.
• Renew when the swivel loosens, the clip slackens or the plastic clouds or cracks, typically every three to six months.
• Do not use a dishwasher, bleach, alcohol-based cleaners or scented oils. The mask instructions take precedence.

The Alvera range

Alvera is the own-brand range from Elarix Medical, built around the parts and consumables that sleep therapy depends on and that need renewing on a schedule: PureFlow filters for Air 10, Air 11 and AirMini machines, ThermaAir heated tubing, AirFlex tubing, AquaPure water chambers, AirSoft cushions, AirFrame frames, AirStrap headgear, AirForm masks, Humiva HME cartridges and PureWipe cleaning wipes. Every product carries its own reference and GS1 barcode, so a repeat order is placed against a code rather than a description, and every line ships from our Leeds warehouse.